KBP
Jun 22, 12:16 PM
Brrr. Powell's collllld. Stay warm out there if you go.
I know, I have been told :( I don't even have one reserved. I hope I get one!
I know, I have been told :( I don't even have one reserved. I hope I get one!
Apple OC
Apr 8, 08:49 AM
a celebrity spokesman will add street cred ... I am sure your Client will agree
ascii42
Mar 19, 03:12 PM
That's probably it then. You have to install RAM in the G5 in matched pairs, meaning same speed and capacity.
iFiend
Apr 29, 10:15 AM
I had recently installed the trial version of My3G mainly to use for Skype & Facetime and had noticed battery life was really being effected (without use of said apps), then I started to notice the remnants of a banner advertisement at the top of the screen when unlocking and switching between apps, after uninstalling I am not seeing those ads any longer so I assume it was My3G doing it.
First question, has anyone else noticed these background ads? Second question, if you purchase My3G does it still do that?
Take your pirating elsewhere.
First question, has anyone else noticed these background ads? Second question, if you purchase My3G does it still do that?
Take your pirating elsewhere.
more...
paolo-
Jan 6, 09:00 PM
How are you plugging them in? If you can get the guitar to work, every thing else should. You should plug the line out from your keyboard to the audio inputs of your tascam. For the mic, it should go into the mic in.
As for returning it, it's not a bad idea. It sounds as though you just plugged things wrong if you can get it to record your guitar. But tascam interfaces are a pain in the ass. Really, I had the L version of the interface and it wouldn't work when I wanted it to. I had to reinstall the drivers countless times, plug and unplug it, restart my computer. And apparently, I'm not the only one to get all of those problem, there's a thread about in the board. They never release new drivers and usually the updates aren't that better. I just hope I can save you the trouble.
As for returning it, it's not a bad idea. It sounds as though you just plugged things wrong if you can get it to record your guitar. But tascam interfaces are a pain in the ass. Really, I had the L version of the interface and it wouldn't work when I wanted it to. I had to reinstall the drivers countless times, plug and unplug it, restart my computer. And apparently, I'm not the only one to get all of those problem, there's a thread about in the board. They never release new drivers and usually the updates aren't that better. I just hope I can save you the trouble.
bytethese
Jun 10, 09:09 PM
Hopefully earlier as the Apple store here is open 24/7. I'm hoping they let us pick up our reserved ones at 7am like AT&T stores.
more...
Old Tony
May 4, 02:45 AM
I don't believe that it was a mistake that u got the 16GB version, either. Keep that, he won't send you the right one.
I find it really sad that some people rely on such unfair methods to 'earn' the money from honest folks.
Don't send him the iPhone back, send him some brawlers ;)
I find it really sad that some people rely on such unfair methods to 'earn' the money from honest folks.
Don't send him the iPhone back, send him some brawlers ;)
Psilocybin
Apr 17, 06:04 PM
I just bought a new MacBook Air Ultimate, and it seems to wobble a bit. The wobbling seems to occur when the lid is fully up because the front left foot pad does not make any contact with the surface of my glass desk. What can I do about this wobble? Is it a problem with the foot pad or the entire body?
Can the guys at the Genius Bar fix this, or should I exchange it?
Thanks.
You can exchange it. Just tell them your not happy
Can the guys at the Genius Bar fix this, or should I exchange it?
Thanks.
You can exchange it. Just tell them your not happy
more...
Ikyo
Mar 3, 08:59 AM
I am thinking about it, but not sure how early to get there to wait in line.
celticpride678
Mar 11, 10:28 PM
Partitioned 25 GB's of space to Lion and haven't touched Snow Leopard since.
more...
Cagle
Apr 5, 07:08 PM
Now of your budget is over 1k then we can talk better cameras ;)
say its 1 to 2k, and the output is for vimeo HD, or a 135" PJ, via iMovie or FCE, what would you kindly recommend?
say its 1 to 2k, and the output is for vimeo HD, or a 135" PJ, via iMovie or FCE, what would you kindly recommend?
arn
May 4, 04:19 PM
Can anyone confirm/deny that 4.3.3/4.2.8 brings AirPlay to the verizon iPhone?
arn
arn
more...
djbahdow01
Apr 4, 06:52 PM
The idea is a nice one but when you actually click on that article they say G4. It is great to hope and wait as i am doing for the PM G5 update. Lets hope they come soon.
zelmo
Jan 21, 10:47 PM
So far, more like an extra 175 ppd.
more...
stroked
May 3, 11:29 AM
No, but you could do a block copy restore of the install DVD to a small partition on either its drive, or an external HD connected to that machine.
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
Wouldn't another option be to use the DVD drive from the 2nd mac in target disk mode, even if the 2nd mac is Intel?
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
Wouldn't another option be to use the DVD drive from the 2nd mac in target disk mode, even if the 2nd mac is Intel?
Blue Velvet
Mar 4, 07:46 PM
I know Quark 6 is a horrible clunky nightmare but this is weird.
There's not the slightest chance you've been working on a different document? I've occasionally done it before...
What back-up software are you using? Most programs will alert you if a file of the same name has an earlier modification date...
What file info did you 'play around with'?
There's not the slightest chance you've been working on a different document? I've occasionally done it before...
What back-up software are you using? Most programs will alert you if a file of the same name has an earlier modification date...
What file info did you 'play around with'?
more...
Lyle
Jul 9, 10:37 PM
OK, so I'm going into "worst case scenario" mode here. Probably the primary thing holding me back on the current revision of the 15" PowerBook is that it has the slower AirPort built in, instead of the AirPort Extreme. Assuming that MWNY comes and goes without an announcement about some kind of update for the TiBook, is there any way to upgrade it to AirPort Extreme?
George Knighton
Mar 11, 10:04 AM
No luck here, either. :-(
jane doe
Apr 16, 08:00 AM
I have my Xbox doing 1080p thru component and it looks fine. I have not tried HDDVD yet but assume it will be OK.
One thing I did notice, When I had it set to 1080i and a played a DVD, the TV would IDENT the source as 480p, now no matter what I put in the Xbox it IDENTs the source as 1080p.
One thing I did notice, When I had it set to 1080i and a played a DVD, the TV would IDENT the source as 480p, now no matter what I put in the Xbox it IDENTs the source as 1080p.
pknz
Jul 29, 08:12 PM
Well they eventually went on sale at midday in NZ (finally).
I ended up queuing up outside Vodafone in St Lukes Westfield Mall. I was the first in the line that began at around 11am with another guy (don't know the name sorry). Ended up being about 30-50 people by midday.
Got myself a nice 32GB on contract.
I ended up queuing up outside Vodafone in St Lukes Westfield Mall. I was the first in the line that began at around 11am with another guy (don't know the name sorry). Ended up being about 30-50 people by midday.
Got myself a nice 32GB on contract.
seepel
Apr 2, 02:55 PM
One of my development computers is such Core 2 Duo MacBook @ 2GHz I bought in Feb 2007. I have Snow and SDK 3.2.6 on it and I wonder if its screen is too small for Xcode 4. Is anyone here running latest Xcode on 1280 x 800?
I often feel cramped with 1440x900 but I find it workable. Then again I am also probably spoiled with my 27" monitor that I'm over sensitive when away from it.
I often feel cramped with 1440x900 but I find it workable. Then again I am also probably spoiled with my 27" monitor that I'm over sensitive when away from it.
Ommid
Apr 25, 01:14 PM
There is circuitry in the other half of the cylinder, USB charging would be ace!
Darth.Titan
Apr 4, 09:07 AM
The second plan probably would work, but you'll have two separate wireless networks.
If you go the second route, I'd just disable wireless on the Linksys and let the Expresses handle wireless.
If you go the second route, I'd just disable wireless on the Linksys and let the Expresses handle wireless.
LethalWolfe
Apr 7, 04:23 PM
Leaked... With intro and everything! Pretty amazing how leaked videos are so polished. ;)
Just because it was intended for in-house or business-to-business use doesn't mean it has to look like crap. We produce a fair amount of in-house promos that either go to the marketing/sales reps or get shown off to the suits up stairs and the videos look as slick as anything you'd see on TV.
Lethal
Just because it was intended for in-house or business-to-business use doesn't mean it has to look like crap. We produce a fair amount of in-house promos that either go to the marketing/sales reps or get shown off to the suits up stairs and the videos look as slick as anything you'd see on TV.
Lethal
No comments:
Post a Comment